Sixty-Four
Item #: 10-202
Optional Add-Ons
Product Details
Jason Lollar’s fascination with guitar tones can be traced back to the sound of early-‘60s (pre-CBS) Strats®. That was the benchmark he aimed for when creating our Sixty-Four™ Strat® pickup. When you hear them, we think you’ll agree he hit the mark! You get prominent midrange and clear top end with a piano-like attack.
Can’t decide which Lollar Strat pickups are right for you? Our Strat Pickup Comparison video will help you understand—and hear—the differences between our four Strat pickup sets. WATCH VIDEO
Avg. DC: Neck 6.4K, Middle 6.5K, and Bridge 6.8K (Read about DC resistance)
Recommended Potentiometers: 250k
Recommended Capacitor: 0.047μF
Special Sixty-Four Set: This is one of our most popular Strat sets.
It includes our Sixty-Four Strat pickups for neck and middle positions, with our Special S Series® pickup for
the bridge. The Sixty-Four pickups are one of our most versatile delivering prominent midrange and clear top end with a piano-like attack while the slightly higher output Lollar
Special S bridge is just bit warmer and more full-bodied than our other Strat-style bridge pickups. To order this set, select "Special Sixty-Four Set of 3" from the drop-down menu
above.
Avg. DC:
Sixty-Four Neck 6.4K, Sixty-Four Middle 6.5K, Special S Bridge 7.6K
Strat Pickup Comparison
Strat Pickup Installation & Height Adjustment
Pre-wired Kit for Strats
Upgrading the electronics in a Strat® yourself couldn’t be easier than it is with our new Lollar Pre-wired Kits. The kits are hand-wired in our shop and meet Jason Lollar’s preferred specifications.
Whether you’re installing new pickups and want high-quality electronics to go with them, or you want to upgrade the stock electronics in your Strat®, our pre-wired kits are a great option. We’ve done most of the work so all that’s left for you to do is install the kit in your guitar and solder in your pickups (sold separately).
Flat vs. Staggered Poles
As their names suggest, flat-pole pickups have all of the individual pole pieces set at the same height, whereas with staggered-pole pickups the pole pieces are set at different
heights. Staggered-pole pickups were originally created to compensate for heavier string gauges—particulary wound 3rd strings.
If you’re unsure which to choose, we typically recommend flat poles rather than staggered. In most cases, flat-pole pickups will give you better string balance, as well as a
little more presence, bass and output.
Read more about flat vs. staggered poles HERE.
Pickup Dimensions
(Shown with cover)
Lollar Strat Sixty-Four Pickups
All Strat Sixty-Four soundfiles with dirty tone were played by Greg Timmons using a Strat with alder body and Brazillian rosewood fretboard played through a 1958 Fender Tweed Deluxe amp with a 1963 Fender standalone reverb.
What They Are Saying
White
Black
Cream
Parchment
Colors shown here may vary slightly from actual colors due to differences in computer monitors.
Frequently Asked Questions
What values of potentiometers and capacitors do you recommend for Strat pickups?
The most common/traditional choices are 250k pots (both volume and tone) and .047μF caps—and these are the values we typically recommend. That said, there are no hard and fast rules. You can read more about how different pot and cap values affect tone in this two-part blog post: Part I - Pots, Part II - Caps.
Do you offer coil tapping for Strat pickups?
We do not offer coil tapping.
Can I use either flat-pole or staggered-pole pickups in my Strat?
Yes, though we usually recommend flat-pole because they offer better string-to-string volume balance as well as a little more presence, bass and output.
Another important point is that staggered-pole pickups are not intended to match the radius of the fingerboard. Staggered-pole pickups can work well with very heavy gauge strings or sets with a wound 3rd string, but for the majority of players, flat pole pickups will be a better fit.
Read more about the difference between flat-pole and staggered-pole pickups HERE.
Will your pickups work in vintage Strats?
Yes! Our four different Strat pickup models can also help you get close to the era-appropriate sound of your vintage guitar. Though pickup cavity route depth can vary by year with Fender, our pickups are sufficiently sized to work across production eras.
Do you make noiseless pickups for Strats?
Our pickups are inspired by vintage builds and voicing. With that in mind, we do not build true noiseless pickups.
Will your pickups give me that “out of phase” Strat sound in positions 2 and 4?
This is a very common misconception; the classic “quack” that you hear in positions 2 and 4 on a Strat is not a result of the pickups being out of phase. All three pickups are in-phase in our builds. The thinner quack sound comes from a drop in output that is a result of two pickups running in parallel as well as from some frequency cancellation (particularly in the low end) that is caused by the pickups being very close together.
Do you offer “matched” or RWRP pickups for Strats?
Our three-pickup Strat sets feature a middle pickup wound RWRP (reverse wind, reverse polarity) relative to the bridge and neck so that they will be hum cancelling in positions 2 and 4 with proper phase.
Do your staggered Strat pickups come in different radii to match my fingerboard?
Our staggered pole Strat pickups are staggered for string balance, not for fingerboard radius. We do not offer custom staggers to match various fingerboard radii.
Do you offer metal baseplates for Strat pickups?
We do not. In extensive R&D, we did not find enough of an appreciable difference to justify the additional cost.
How far from my strings should I set my Tele pickups?
We advise customers to start with 1/8” between their pickups and guitar strings with the strings fretted at the last fret. This is just a good starting point, but you can raise your pickups to increase volume, or lower them to decrease volume. Check out Jason Lollar’s video on Adjusting Your Pickups.